N. to regulate the stitch length – SINGER W150 FL User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
n. TO REGULATE THE STITCH LENGTH
By regulating the FEED REGULATING LEVER up or down sewing could be done
backword and forward with the same length of the stitch.
(1)
The graduator indicates Stitch length - figures from 0 to 5 ;
(2)
Loosen STOP SCREW (11) of LEVER by turning to the COUNTERCLOCK
WISE and set the LEVER at the desired length of the st.tch ond secure by
tightening the SCREW and commence sewing;
(3)
The backward (reverse) sewing can be made with the same leng
forward stitch by pushing up the LEVER as for as it goes for "R-, marked
direction. (Fig. 17).
Fig. 17
TO REMOVE THE WORK • TO REGULATE THE THREAD TEHSION . TO REGULATE THE STITCH LENGTH
^ TO REFLATE THE PRESSURE OF THE PRESSER FOOT TO USE THE DROP FEED DIAL
BUILT-IN LIGHT _ =
TO OIL SEWING MACHINE
^
I^SOMEIJSEFUra^^^ .
‘
causes
of
common
d
W
iculties
needle
and
thread
sizes