Flat bed sewing, Changing the presser foot, To remove the presser foot – SINGER W1220 User Manual
Page 5: To attach the presser foot
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FLAT BED SEWING
• When the extension plate is attached,
you have all the advantages of a flat
machine for sewing flat items,
and for sewing large tubular
items such as flared pant legs.
CHANGING THE PRESSER FOOT
Raise needle bar to highest
position and raise presser
foot as shown.
The extra lift for heavy fabric
makes it easier to place fabric
under the presser foot.
TO REMOVE THE PRESSER FOOT: ■
• Press button on back of presser foot
shank and foot will drop from shank
as shown above.
• It is not necessary to loosen the thumb
screw to change presser foot.
BarasratsEs:
TO ATTACH THE PRESSER FOOT;
• Align desired presser foot to shank as shown above.
• Lower presser foot lever and shank will automatically attach to foot
as shown above.
s
T
R
A
I
G
H
T
A
N
D
'Z
I
G
'Z
A
G
B
U
T
T
H
o
L
E
S
F
E
A
T
O U
N R
E
S
A
N
D
P
A
R
T
S