Material puckers, 6 threads jam at start o.f sewing, Machine is noisy – SINGER W1220 User Manual
Page 38: 1 8. bobbin does not wind properly, White, Enjoy your new
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A Tate° p^eveMs
as you s,aP sewing. Always star, and end with
your take-up lever in its highest position.
‘ A. p'«n“^“ab" wWle sewing bends .be needle, this may cause breakage it needie bits
the plate.
B. Needle is inserted incorrectly.
C. Needle is too fine for the type of fabric.
D. Needle is hitting pins.
E. Presser foot is improperly fastened.
F. Machine is improperly threaded.
5. MATERIAL PUCKERS
A. Tensions are too tight.
B. Improper threading.
C. Thread is too heavy for fabric.
D. Stitch is too long for fabric.
p
Needle is dull
SO
it is difficult to seam fabric.
F. The presser foot being used is not holding the fabric taut enoug .
G. If all else fails, try sewing over paper.
6 THREADS JAM AT START O.F SEWING
re’Tbma??nSflt; a:d'’»'re“d?o, presser ,oo. instead o, .o .be back,
C. Be sure the presser foot is down on thick fabrics.
7. MACHINE IS NOISY
A. Clean and oil it.
B If it is a punching sound, changing the needle.
c'. Stitch length dial is not at 4 when stretch stitching
Set is at 4 ,
1 8. BOBBIN DOES NOT WIND PROPERLY
A. Machine is improperly threaded.
B. Rubber wheel on bobbin winder is worn or not making contact.
C. Bobbin winder tension disc is not in position.
enjoy your new
WHITE
36