SINGER W1220 - Manual (Page 10)

UPPER THREADING
Raise needle bar to its highest position.
Raise presser foot.
Lead thread through top plate thread guide (1) and between te
discs ( 2 ).
Pull thread down around arm thread guide (3) and up to ta
lever 14).
Lead thread through eyelet on take-up lever from right to lei
down through face plate guide (5), hooking thread into guide
Pull thread down through needle clamp guide ( 6 ) and th
needle hole from front to rear 17).
Always use the same type of thread on top and bottom as dif
sizes or types of thread will cause tension problems.
Example: Polyester thread on the bobbin and cotton thread o
will result in poor tension quality.
8