Atiim stitching, Tapering/creative embroidery, Manual embroidery designs – SINGER W1220 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

>ATIIM STITCHING
I his is useful for decoration such as tapering,

rianual designed embroidery, monogramming,
Hid applique.

(he satin stitch, which is a very close zigzag
aitch, is obtained by setting the stitch length as

lear to "

" as possible without stopping the

eeding action. The setting will vary for different
abrics. It may be desirable to loosen the upper
ijnsion slightly to cause the threads to lock
mderneath, in order to make the top surface

Dok especially smooth. For lightweight fabrics,
liace paper underneath the fabric while sewing

or best results.

Pattern: АЛЛ
Length: % Уз

Width: 15

Feed Dog: A.A.

Pressure: Normal
Foot:

All Purpose

Needle Position:

TAPERING/CREATIVE EMBROIDERY
Tapering is done by gradually increasing and

decreasing the stitch width while sewing. By this

method, tapered monograms and other in
teresting designs can be created. For tapered
monograms run the machine fast while turning
the width dial slowly from narrow to wide and
back.

First, learn this stroke by letting the fabric guide

straight. Then, learn to pivot the fabric as you
are tapering by holding the fabric at one point.
Various strokes can be combined to form letters
and designs. Variegated thread can give attrac
tive results.

Pattern:

АЛЛ

Lenght: Уг

Уз

Width: 0-5

Feed Dog: A A
Pressure: Normal
Foot: All Purpose

Needle Position:ф ► or

MANUAL EMBROIDERY DESIGNS
iJifferent designs can be made by turning the

.iiich width dial between 0 and 5. By running the

iicichine at a constant speed and turning the dial

II: a definite rhythm, various designs can be
t teated.

Pattern:

АЛЛ

Length: Vz

-’/3

Width: 0-5

Feed Dog: A A
Prssure: Normal

Foot: All Purpose

Needle Position:^ ^ or

О У

N R

Е
S

Я:

1 ^ ‘