Adjusting pressure and choosing accessories – SINGER 413 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Any stitch length setting from 6 to 20 will
give you an open zig-zag stitch of the

basic zig-zag stitch pattern you select.

The lower the number, the more open, or
farther apart, your stitches will be. The

FINE stitch area, between 0 and 20 on

the dial, is used for adjusting zig-zag
satin stitching (see next page for specific

instructions).

When using the plain zig-zag or blind-

stitch patterns, be sure the Flexi-St/tch

pattern dial is in off position 0.

ADJUSTING STITCH LENGTH

STITCH CONTROL

ADJUSTING PRESSURE AND CHOOSING
ACCESSORIES

Turn to page 18 under straight stitching for instructions on adjusting

pressure.

For information on choosing accessories, refer to pages 6 and 7 and to

detailed instructions for sewing with zig-zag stitch patterns included in the
section called "Sewing the Professional Way" that starts on page 36.

General Purpose

Foot

General Purpose

Throat Plate

Special Purpose

Foot

Zipper Foot