Guiding and supporting the fabric, Reinforcing end of seam – SINGER 413 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

STRAIGHT STITCHING (Continued)

GUIDING AND SUPPORTING

THE FABRIC

Most fabrics need only to be guided in

front of the presser foot. Some fabrics,

however, require support while being

stitched. Filmy sheers, pann6 velvet, and
tricots, for example, need to be held taut

in front and back of the presser foot while
being sewn.

For information on sewing knit and

stretch fabrics with zig-zag stitching,
refer to page 37.

REINFORCING END OF SEAM

1. Stitch to the fabric edge.

2. Push in stitch control dial and back

stitch i inch to reinforce the end of
the seam.

3. Raise presser foot and remove fabric

by drawing it to the back and left.

4. Cut threads on thread cutter at rear

of presser bar.

Ending a Seam