SINGER 413 - Manual (Page 17)

RAISING THE BOBBIN THREAD
Now that you have wound the bobbin
and threaded the needle, you will need to
raise the bobbin thread through the needle
hole in the throat plate.
1. Hold needle thread lightly with left
hand and turn hand wheel slowly
toward you so that needle enters
hole in throat plate.
2. Continue turning hand wheel and
holding needle thread until needle
rises and brings up bobbin thread in
a loop.
3. Undo the loop with your fingers.
4. Place both needle and bobbin threads
under presser foot and draw to back
of machine.
You are now ready to sew
15