Xo reverse sew, Co uegiilalc the jceagth of thc^stitchm, Xo reverse sew i – SINGER W1305 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r'|‘.
CO Uegiilalc the jCeagth of thc^Stitchm^:^
rf
'To regulate length of
stitch, loosen thumb-screw
"A” and move it to the
bottom of the curved slot.
Now move stitch regulat
or lever “B” until its top
side is in line with the
number indicating the se
lected length of stitch.
Move
thumb-screw
“A”
until the regulator plate
touches
the
lever
”B”,
then tighten thumb-screw
"A”.
Xo Reverse Sew
i
Loosen the thumb-screw "A” and move lever "B" above center line
towards position "R”.
can now adjust for desired reverse stitch. Tighten thumb-screw
A , so that it will lock the stitch. The machine will now sew in reverse.
NEVER SEW OR USE THE MACHINE with the Lever in
the NEUTRAL position.
To ADJUST THE BOBBIN TENSION.
All
sewing
machines
are
correctly
adjusted
before
leaving
the
factory,
and
it
is
therefore seldom necessary to alter the bobbin tension.
'
Should it become necessaiy to do so, however, due to using certain hinds of materials,
the
adjusting
screw
in
the
tension
spring
on
the
outside
of
the
bobbin
case
can
be
tightened so as to increase the tension, or loosened slightly in order to lessen the tension.
10