SINGER W312 Old - Manual (Page 5)

1. fake-up
2. Pressure Control
3. Top Thread Guides
4. Stitch Selector
5. Creative Embroidery
Control
S. Stitch Width Control
7. Bobbin Winder
8. Hand Wheel
9. Stitch Length Control
10
,
11
i
14.
15.
16.
17,
18.
19
23
24
Reverse Button
Sobfain Winder Ten:
Discs
reed Dog Height
Control
Needle Plate
Presser Foot
Slide Plate
Thumb Screw
Check Spring
Face Cover
■Tension Control
Needle Clamp
Spool Pins
Light Switch
Presser Foot Lever
Thread Cutter
25. Feed Dog
26. Head Hinge Holes
27. Motor
28. Belt Cover
2S. Clutch Nut
.Always at its highest position when beginning or ending
sewing.
For regulating the pressure on fabric.
For leading thread to tension control for sewing
For changing between ordinary and stretch stitches.
For precise adjustment of zigzag stitch width as well as
tapering.
For setting stitch width
For winding thread on bobbin.
For the control of the up and down movement of the
needle.
For selecting stitch length between no feeding and
about 6 stitches per inch.
For easy backtacking to lock thread ends.
For providing proper tension on thread when bobbin
winding.
For regulating feed dog height for various materials and
types of sewing.
With guide lines for sewing accuracy.
For holding fabric when sewing.
For opening an access for bobbin and bobbin ca^.
For tightening presser foot in place on presser bar.
For automatic precise adjustment of flow of upper thread.
Hinge-open type for replacement of light bulb and oiling.
For regulating the amount of tension on upper thread.
For holding needle in place in the slot of needle bar.
For holding spools, preventing over-spin of spools.
For turning on or off the light inside face cover.
For lifting or lowering presser bar and presser foot.
For convenience to cut both upper and lower threads
after sewing.
Diamond point to move fabric accurately.
For installation of machine head into portable case or
cabinet.
110 — 115 Volts, for running machine.
For covering motor belt.
For releasing movement of the needle bar in order to wind
bobbin.