Attachment foot, The edgestitcher – SINGER W165 User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3 2

ATTACHMENT FOOT

In ordei CO attach the binder, edgestitcher and the

hammers, it is necessary to remove the presser foot and

replace it with the attachment foot, Fig. 41.

'Mo.unt binder, edgestitcher or hedimers sliding the

attachment to the left as far as possible and tighten

screw.

The mounting slot enables you to sew as close to or

as far away from the edge as desired, just move the
attachment to the correct position before tightening the
mounting screw.

Fig. 41

THE EDGESTITCHER

The .edgestitcher is used in making

lace

insertions,

edgings

and

pipings.

want on top in slot, Fig. 42, and other
piece in slot 4.

To trim with a wide piping, place

Fig. 43

Fig, 42

the fabric in slot 4, and the fold of the piping, to the left in slot 3. For a narrow piping, place
the fabric in slot 2 and the folded edge of the piping to the right in slot 3,

Slot 5 may be used as a guide in stitching a french seam.