SINGER 99-13 - Manual (Page 23)

To Adjust the Ruffler for Group
Plaiting and Gathering
u
naiting ana Vjatnering
Tlu! riililer ßim l)c adjusted for group ]>!ail.iiig hy
lifting the adjusLiiig luvor (10, Tig. and i>lac.ing
E.')l|7¡
Pro. 4t
it on top of tile projerlioti (0, Tig. 41) at the point
indicated hy the star on the ailjusting lever. 'I’liis
shouUl he done at the ])oinl.s where you wish to
make the space hetweeii the plails. The ruifler will
then .slop and plain stitching will he made. \\ hen
the desired space has been made, adjust the lever
(10) so that the projection (9) enlers the slot marked
Jly alternalely inakiiijj groups of plaits and
plain spaces, as shown in ]''ig. 41, very attractive
Work can he proiluced.
To Oil the Ruffler
Occasionally apply a drop of oil to the working
parts of the rulller at each of the places indicated hy
arrows in Tig. 41. After oiling, operate the rufller
on a waste piece of material to iirevent the oil from
soiling the work. If the rulller does not plait evenly,
a drop of oil may remedy the trouble.
45
To Use the Cloth Guide
To ensure accurate guiding of the work w'lien
sewing close to the edge of the goods, the cloth
E64№
Iffa. 12
guide (V, h’ig. 42) should be used. TasLen the
cloth guide to the bed of the machine by means
of the clami>ing thumb screw (W, Tig. 42), inserting
the thumb screw inl.o either one of the two screw
holes in the bed of the machine. The cloth guide
can be adjusted to bring the edge of the goods
as close to the lino of stitching as desired.