Machine setting – SINGER White 5500 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sawiili on Buttons

With the specially designed two-step foot lifter, even thick buttons can be sewn easily.

Machine setting

(1) Set the zigzag width

at "0".

(2) Place the button so

that the needle lo

wers into the left
hole.

(3) Lower the presser

foot.

(1) Turn the handwheel

until

the

needle

comes up above the
button.

(2) Set the zigzag width

so that the needle

is positioned right

above the right hole.

Step-4

(1) Sew the button on.

(2) Draw out the work

and cut off the thread
ends with 10cm (4")
left.

Draw the thread
ends through to the
wrong side and tie
a knot.

If a shank is required, insert a needle in the Centre of

the presser foot and sew over It. Re-set the needle
position at the mark.