SINGER White 5500 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Raise presser foot lifter and needle bar

(1)

Raise the presser foot lifter.

(2) Set the needle bar in the highest position

by turning the handwheel toward you.

Changing a foot

Snap-on presser foot

Step-1

Step-2

Step-3

presser foot

Push the lever of the
holder in the arrow

direction.

Position a new foot

with

the

pin right

under the groove of

the holder.

By lowering the pres

ser foot lifter, the foot
will be automatically

snapped on.

»When you fail to catch

the foot, press the
lever slightly.

Screw-snap presser foot {darning foot)

Step-1

Remove the foot and

the holder by loosen

ing the screw with a
screwdriver.

screw

Step-2

darning

Step-3

ever of

the foot

Align the hole of the
darning foot with the

hole of the needle

plate.

Lower the needle by

turning the handwheel

toward you.

The lever of the foot
should be behind the

needle clamp screw.

Tighten the screw on

the holder.