Rajae foot and needla ьвг, Threading the upper threat – SINGER White 5500 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Twin Ns«

ding

Rajae foot and needla Ьвг^

(1) Raise the presser foot lifter.

(2) Set the needle bar in the highest position

by turning the handwheel toward you.

Threading the upper threat^

Thread by following numbers ®

@ while pressing the two spools lightly with your fingers.

»Be careful at the points ® ® and ®, since the way

of threading is different from the normal
threading with one spool of thread.

Step-1

Рам the threads to

gether to the guides
Ф and

Step-4

tension

spring

Pass them separately to
the right and left at the

guide @.

guiding

plate ®-

tension

discs®.

Lead one of tl» threads
between the discs front

and middle and the
other one between

middle and back.

Lead the two threads to

gether into the hook of the
guiding plate ® by pulling the

tension spring to the right
with the threads.

Step-5

Thread the take-up lever

then the two needle eyes ®.

Leave the ends of the threads

of about 15cm (6").