SINGER W910 - Manual (Page 25)

Pattern: (()
Length: 1^3
Width: 5
Feed Dog: High
Pressure: Full
Foot: All Purpose
Stretch Control: M
Pattern; <1 (|)
Length: 1-3
Width: 1
Feed Dog: High
Pressure: Full
Foot: All Purpose
Stretch Control: M
Pattern:^,' (|)
Length; 0
Width: 2—5
Feed Dog: Down
Pressure; Full
Foot; Button Foot
Stretch Control: M
ZIGZAG STITCH:
OVERCASTING
Place the edge of the material urxierneath
the opening of the sewing foot and guide
raw edge along the center slot of the foot
a lowing stitch to form half on and half
o n the fabric.
The multiple stitch zigzag is a wiser
choice for most fabrics.
See page 30.
SEWING KNITS
yearns
of firm knits for added strength After
sewing, open seam and press flat. Tiny
zigzag stitches can hardly be seen and the
seam will give when stretched
Generally on knits, however, try the
See
SEWING ON BUTTON
Place the button so that the holes of
button are positioned in same distance
from the center straight stitch needle
position respectively.
Turn hand wheel by hand until needle
point lowers close to the face of button.
Turn stitch width control until the needle
comes just above a hole of button
Turn hand wheel slowly by hand to check
If the needle comes just above another
hole of button after clearing the first
ole of button. If necessary, readjust
the button position below button foot
and repeat above checking and adjust­
ment of stitch width.
Note; Be sure the needle clears the holes
of the button by moving the hand wheel
by hand before running the machine
fast.
Usual 6 to 8 stitches are adequate for
securing a button in place.
To lock the threads, set the stitch width
at 0 readjust the button position to that
a hole of button is just below the needle
and take a few stitches in the hole. '
25