SINGER W910 - Manual (Page 11)

SELECTION OF PRESSER FOOT
Straight Stitch Foot
This has only a narrow hole to accom­
modate only straight stitching. It may be
used on sheer or soft fabrics for more
control. When using this foot, the Stitch
Width should be 0 to avoid hittinq^th^
joot and breaking the needleT ~
Buttonhole Foot
This foot has a groove underneath, to
allow the narrow satin stitch or button­
hole to form evenly. However, if skip-
stitch occurs on sheer fabrics with this
foot, it may be necessary to use thin
paper underneath.
Cording or Zipper Foot, and Button Foot
Use for sewing very close to the edge of a
cord or zipper, and sewing on buttons
respectively.
CHANGING FOOT
Use the large screwdriver to loosen thumb
^rew. Turn the screw backward until the
foot becomes loose. Then, lift up on
presser foot lever until it is in its highest
position in order to remove the foot.
R^eplace with desired foot and tighten
thumb screw securely.