SINGER W1762 - Manual (Page 36)

THE SET OF HEMMERS
Before attaching any of the hemmers, be sure bobbin
thread IS pulled up. Then, with hemmer in place, hold top
.h,e,d loo»ly and turn handwheel one full turn toward you^
making a loop under hemmer. Grasp bobbin thr
both hands and slip horizontally under hemmer toward back^
Bobbin thread will catch loop and carry upper thread to
back of hemmer. i ^ naainro
Fold material in 1 8 inch for two inches along edge,
hold at each end of fold. Slip fold into guide and up over
spoon (Fig. 46). Fold hem in material back of hemmer.
Draw forward to end of hem and fasten with point of needle.
Pull on threads gently as you start stitching.
darning spring
HOW TO ATTACH
Remove presser foot, unthread needle, place darner
spring, on needle and slip hook up over hub on needle clamp.
PATCHING AND MONOGRAMING
See page. No. 23 Fig. 47.
Fig. 46