Automatic embroidery – SINGER W1762 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E Drop feed lock .litoh width at 4, take 3 or 4 stitches, leave needle ш tabno left of stilches.
Pivot fabric on needle to make next daisy petal. Continue until flower design in complete.
Lock threads by setting stitch width at 0 and taking 3 or 4 stitches in center of design.
J, Vi -is Ч
12
13
15,
D
В
Fig. 24
Fig. 25
AUTOMATIC EMBROIDERY
Your machine will produce embroidery patterns automatically by inserting anyone of its cams
f'Fia 24' in the chamber on top of the machine.
. i i
»s»
' Be sure the zigzag needle plate and zigzag presser foot are on the machine, control lever. A
' Fia 25') is in the "C" position and the zigzag stitch width stops D" are in the off positions.
" With zigzag stitch width lever "B" (Fig. 25) in its extreme right hand position, place cam
on spindle, apply slight pressure while turning cam until it slips down into place.