SINGER W1762 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

PLACING BOBBIN CASE IN SHUTTLE

Open hinged cover plate left of the needle.

(See 12, Fig. 1) Hold the bobbin case latch, (D),

Fig. 9, between the thumb and forefinger of the left
hand, with at least three inches of thread running
from the top of the bobbin case to the right. Insert
and center the bobbin case on the stud of the shuttle

body, (C). Be sure
the

bobbin

case

finger, (El, is will
enter

the

shuttle

race

notch,

(A).

Press

the

bobbin

case (B) into the
shuttle as far as pos

sible

until

latch

catches

the

center post of the

shuttle.

THEN release the bobbin case latch, (D).

Press bobbin case again after latch has been re
leased to make sure the bobbin case is locked

securely in place. Close the cover plate.

Fig. 9

Fig. 10