Ladder seam – SINGER 1280 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ladder Seam
The biindsthcn iadder searri ;s partcu^ahy apDropnate
for КПП and stretch tabrscs И ss юеа1 for stretcnaoie
construction seanns. and edge finishes for necKiines,
pockets and collars in sportswear and swimsuits
• Pattern Group: 5У]^ (Blue)
• Needle Position
L
[XJ
À
• Stitch Width:
: I I I i
♦ Stitch Length:
15
to 2.5
♦ General Purpose Needle Plate
♦ General Purpose Foot
* •
* 'Make a test sample to aciust stitch width and length
and needle thread tension to su:t the fabric Needle
thread tension snouid oe lighter than normal.
• Cut and fit garment, allowing tor i,5 cm (5/S inch
seam allowance Baste seam Nne.
• Place fabric uncer presser toot so that the stm:oht
stitches fall on the seam line casting and the points
toward the centre of the ca-ment
♦ After stitching, open seam py pulling tabnc Pack on
opposite Sides of the seam to produce ladder effect
Press seam allowance after openmg.
54