Getting ready to sew, Choosing and changing accessories, Changing presser feet – SINGER 1280 User Manual

Page 11: Changing presser

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

2. Getting Ready to Sew

Choosing and Changing

Accessories

CAUTION:

Disconnect the power line plug from the

socket outlet when changing needles, feet, or needle

plates, or when leaving the machine unattended. This

eliminates the possipility of starting the machine by
accidentally pressing the speed controller.

Changing Presser

Feet

♦ Raise

needle

to highest position by turning the hand

wheel

toward you.

* Raise presser foot.

1 Press toe of presser foot upward as far as it will go

until it snaps free.

Centre the new presser foot under the shank A.

Lo'wer the presser foot lifter

so that the shank fits

over the presser foot pin.

Press presser foot screw down

firmly

until foot

snaps into place.