Attaching blindstitch hem guide – SINGER 1280 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Removing and Replacing the

Button f=bot and Presser Foot Shank

• Raise needle to highest poshion oy turning the hand

wheel

toward you.

* Raise the presser foot

• Loosen presser foot screw

and rennove the shank

B. guiding it to the nght.

♦ To replace the accessory, hook shank around the

presser bar and tighten the presser foot screw.

NOTE: Insert the edge of a com m the seat of the

presser foot screw to loosen it and tighten it securely.

Attaching Blindstitch Hem Guide

♦ Raise presser foot, loosen presser foot screw and

slip blindstitch hem guide between screw and shank
of the general purpose foot,

• 8e sure underside of the guide clears the slide plate

and front of foot.

•

• Tighten screw with a coin.