SINGER W1465 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CREATIVE EMBROIDERY
15
With,
the
use
of
the
needle
position
lever
in
combination
with
the
ziqzao
stitch
width
control, decorative stitch design possibilities are unlimited.
The basis for most embroidery is the satin stitch (Fig. 23) which is ohtainod K
the atitoh .e.,,h
heob (13
Fig, 24) e.
o.ose
to 0
as Posible withcjt „ppr„:"rele The needle position lever may be set in any position ieediPg action. The stitch width control (5 Fig. 24) may be set any where from 0 to 4. Fig. 23 . ADJUSTING THE STITCH WIDTH To stitch continuously at one width of zigzag stitch ing, set pattern selection knob 4 at "M" and zagzag stHch width control knob 5 at 4 by turning zigzag stitch should you wish to move freely between only two widths such as 2 and 4 in doing free hand embroidery, turn stitch width stop knob 6 to set zigzag stitch width to desired position. The number 2 width will be produced until the zigzag width control knob 5 is moved to the 4 width. Fig. 24
width stop 6 Fig. 24.
knob