To remove and replace bobbin case, Open slide plate and remove throat plate (see – SINGER 1360 Style-O-Matic User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
69
TO REMOVE AND REPLACE BOBBIN CASE
• Open slide plate and remove throat
plate (see
page 14).
• Unlock bobbin case by lifting and
pulling holder to right as shown.
• Remove bobbin case from machine.
9
Remove all lint, fluff or other foreign
matter which might clog machine.
• Replace bobbin case so that groove
under tension spring fits on hook race
way and fork of case straddles position
ing stud.
• Push bobbin case holder to left until it
snaps down into lock position.
• Replace throat plate and close slide
plate.
POSITIONING
STUD
This manual is related to the following products: