Set needle position at, And stitch width at, For side stitching (see – SINGER 1360 Style-O-Matic User Manual
Page 44: Position needle in fabric at point
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 2
Procedure:
Set needle position at
L
and stitch width at
2
for side stitching (see
page 40).
Place work under needle, aligning center marking of buttonhole with
center score line of Special Purpose Foot.
BUTTONHOLES (Cont’d)
Side Stitching:
Position needle in fabric at point
A.
Lower foot and stitch to end
of marking. Leave needle in fabric at B. Raise foot and pivot work on needle.
Lower foot, and take one stitch without changing lever setting, bringing work
to
C.
Bar Tack:
Set lever at 4 for bar tacks and take six stitches to complete tack.
Stop at point
D.
Side Stitching:
Move lever back to 2 and stitch to point E. Point E is approx
imately six stitches from end of buttonhole.