SINGER W1717 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

push back to fold handle,

full out spool pin and put a felt

iin spool pin.

Rut a spool on spool pin.
Draw thread from spool pin

through thread guide and pre
tension device, following numb-

(I;

and

(Z).

W
bo
Pu

'ind thread clockwise around

ibbin several times.

ish bobbin on to spindle.

Holding handwheel with your left

hand disengage handwheel by

unscrewing stop motion knob.

trouble

correction;

y 1

Push bobbin to right and press

down foot controller.

Machine stops automatically

when bobbin is full.

Push bobbin to left, to disengage

from wheel.

Take off bobbin from spindle
and cut thread.

Retighten stop motion knob.

If bobbin is wound unevenly

as shown, open face cover and
loosen set-screw of the guide for
bobbin winding: Use screw driver

to adjust height.

1 n -