Mending patching, Mending a rip – SINGER W1717 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1(6. SCALLOPING

Sfet machine as shown.

Rut two pieces of cloth together

vtith right sides facing, and sew.

’ rim edge 0.3 cm (1/8") away
from stitching.

Make notches on seam edge at
Evenly spaced intervals.

Turn two pieces to right sides

out. Bring stitching line to very
edge by pushing seam edge
gently with your fingers, and

Dress.

-42

17. MENDING

Patching

Set machine as shown.

Place the patch over the worn
part.

Sew along the edge of the patch
on the right side. Trim away the
worn part close to the seam on

back side.

Mending a Rip

Set machine in the same way
as for patching.

Sew the edges of tear together
first.
Then sew two more seams on

either side.

A piece of gauze can be placed

underneath to reinforce the rip.