Overcasting, Tv ly – SINGER W1717 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. SEWING ON BUTTONS
Set machine as shown.
Position a button and material
under foot. When needle comes
to left side of stitch, lower foot.
Raise needle and adjust zigzag
width so that needle comes to
night hole of button.
Run machine at medium speed
and sew 5-6 zigzag stitches.
Stop machine when needle is in
upper position.
;a Set zigzag width control to 0
and sew 3-4 stitches to prevent
unstitching.
OR
ib: Draw out work and cut off
threads.
Draw thread ends through to
wrong side and tie a knot.
tv ly
8. OVERCASTING
For light weight material:
Set machine as shown.
Overcasting prevents edge of
fabric from fraying and produces
neat finish.
Sew carefully so that all stitches
on right side are flush with edge
of fabric.
For thick and elastic material;
Set machine as shown.
Sew in the same way above.
-27-
-28-