SINGER W1563 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Many More Tlmo-Savlng Wonder Working
Available From Your Dealer At Modst Prices - - Here Are Some
Order them by genuine part numbers shown
17
Ruffier-Pleatar No. 1403
Just on one set of curtains for Üae kouse, you
will save Ixours and kotirs of time and nerve-
wracking tediousness by using your maciiine
and a Huffier. For pleating skirts and slip
covers; marking gift aprons, clxildren's clothes
with ruffled finishing touches; adding fullness
to dress bodices, are just a few of the many
uses for this versatile attachment. Also while
ruffling a trimming you can sew it on the main
fabric simultaneously. Despite its wide range
of practical applications it is amazingly simple
to use.
Zipper Sew-in and Cording Foot No. 1 873
Needed to sew in zippers by machine. Per
mits stitching very close to the metal fastener
for smooth, secure results in a jiffy. Adjustable
for stitching on either side of foot - - left or right.
Also needed for Cording.
Darning Spring No. 4990
Of great assistance when Darning or Mono-
gramming
with
Presser
Foot
removed
from
machine--especially
when
using
a
hoop.
It
justs slips over the needle and hooks onto
needle clamp.
Edgestitcher No. 76554
The fast, foolproof aind fine-finish way to sew
pipings, edgings amd lace insertions. Easy to
use--with a range of slots to guide the fabrics
and the operator.
Binding
Appiler
No.
74159
Another
tremendous
time-saver.
This
attach
ment folds plain, flat bias binding from a roll;
also hand-cut bias binding, AND applies it to
edge of material at the same time. Also does
a fine job of applying standard sizes of folded
and two-tone (two different colors) bindings
simultaneously.
Almost
a
must
for
making
children's garments fast and easily.
Hemmers for Four Popular Hem Widths
To go with the Narrow Hemmer which came
with your machine. Order by number accord
ing to the width of hems wanted: ^4 inch-No.
76550; % inch-No. 76551; % inch-No. 76552;
vg inch-No. 76553.
Attachment Holder No. 82528 -
NECESSARY FOR ATTACHMENTS ABOVE
To use the Edgestitcher, Binding Applier, or
wider Hemmers on your machine you must
first install the Attachment Holder in place of
any Presser Foot.