SINGER W211 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

WINDING THE BOBBIN

TO DISENGAGE THE HAND WHEEL:

• Hold the hand wheel (1) with left hand, turn

clutch (2) counterclockwise with right’hand to

disengage as shown.

TO WIND THREAD ONTO BOBBIN:

•

Lead thread through spring thread guide (4) and

through the hole in your bobbin from the inside

out.

• Place the bobbin onto the bobbin winder shaft

(3).

• Push the bobbin winder to the right.

• Hold loose end of thread firmly and turn hand

wheel to make thread tight. Apply gradual
pressure on foot pedal until automatic shut off
disengages bobbin winder.

• Cut off loose end of thread.