Monog ramming, Procedure, Embroidering – SINGER W211 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EMBROIDERING

0 a 1

Needle Position Selector and

Zigzag Width Control Dial

Stitch Length

Control Dial

MONOG RAMMING

PROCEDURE:

•

For free-motion sewing, press 'H" drop feed button,

and press down on outer ring of the pressure regulator

to release pressure completely.

•

Place under needle of fabric into an embroidery, a

darning and a monogramming hoop.

•

With the width at "O" make 5 or 6 stitches to

reinforce the starting point.

•

At the desired zigzag width stitch to outline the

design by moving the fabric and hoop in a side

motion. To fill the design, move the fabric and

hoop from side to side in a rhythmic motion.

•

To return feed to normal, press drop feed

button, and push down on the pressure cap to

obtain the desired setting.