Connecting the machine, Running the machine – SINGER 7025 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the machine
Push plug into the receptacle (1) at the right
end of the machine. Then connect plug (2)
to your socket outlet.
For North America
"This appliance has a polarized (one blade
wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a
polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not modify the plug in any way".
Running the machine
To turn on machine and sewing light, press
upper portion "I" of power switch. To turn off
machine and light, press lower portion
"O"
of power switch.
To run the machine and control speed, press
the foot control with your foot. The harder
you press, the faster the machine will sew. To
stop machine, remove foot from control.
Note:
Do not operate machine without
fabric under the presser foot as this
may damage the feed and the
presser foot.
12