SINGER W2137 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Fig. 42

HOW TO REPLACE LIGHT BULB

Grasp light bulb button (see 31, Fig. 2. and pull light bracket down

ward.

Unscrew

bulb

and

replace

with

bulb

same

size,

which

available from your sewing machine dealer.

HOW TO CHANGE THE BELT

IE it should ever become necessary to replace the belt on your ma

chine, the hand wheel must iirst be loosened and moved out.

To do this, follow thosG instxuctions .

Remove clutch nut A in center of wheel by taking out the small

’ screw B near the edge, Fig. 40. Turn nut counterclockwise until

it can be lifted off.

Before moving the hand wheel, note the position of the washer,

C, Fig. 41, which fits under the clutch nut. It may fall out when

you are changing the belt.

Pull hand wheel away from the machine carefully, Fig. 42. Pull

it just far enough to make the grooved section which holds the

belt accessible.

Slide old belt over hand wheel and over pulley on the end of

motor.

...