Preparing to sew, Preparing to sew -17 – SINGER W2137 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig. 19
B down again to halfway spot. Lower the feed slightly by turn
ing the drop feed knob to SILK.
Darning and Monogramming.
In order to move the fabric
freely in any direction for darning, mending and certain kinds of
free-hand
embroidery,
release
the
pressure
cap
B
completely
by pressing down on the snap lock, A, Fig. 18. Turn the drop
feed
knob
to
DARN
position,
which
drops
the
feed
well
below
the needle plate. To return feed to normal, turn knob to REG.
PREPARING TO SEW
Have take-up lever at highest point before starting to sew. Do
not try to help the feeding by pulling the material as this may
deflect the needle and cause it to break.
NEVER run machine without material between presser foot and
and feed. Place material and threads in position under the pres
ser foot and lower the presser foot. Turn the hand wheel toward
you until the needle is at its highest point. You are now ready
16