V- inserting and changing needles, Inserting and changing needles – SINGER 1725 User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

V-

Inserting and changing needles

Change the needle regularly, especially if it is showing signs

of wear and causing problems. For best sewing results always

use SINGER Brand Needles.

Insert the needle as illustrated as follows:

A. Loosen the needle clamp screw and tighten again after

inserting the new needle. (1)

B. The flat side of the shaft should be towards the back.

C/D. Insert the needle as far up as it will go.

Attention:

Turn power switch to off ("O") before inserting or removing
the needle.

Needles must be in perfect condition. (2)

Problems can occur with:

A. Bent needles

B. Blunt needles

C. Damaged points