Cabletron Systems SFCS-200BX - Manual (Page 90)

6-6
Software Upgrade Instructions
To use the new version of software that you have just loaded, type y and press
or simply press to reboot.
Reboot the switch[y]? y
Once the SCP reboots, you will be closed out of all active sessions on the SCP.
You will need to log in to AMI again if you want to begin another session.
NOTE: If something went wrong during the upgrade
process, a new file named “upgrade” will
appear in the FLASH file system and you will
not be prompted with the “
Reboot the
switch [y]? ” message.
If the upgrade is unsuccessful or if you have any other problems with the
upgrade, please contact Cabletron Systems’ Technical Support.