Cabletron Systems SFCS-200BX - Manual (Page 121)

B-3
SCP Diagnostics
do [offset] - download using Xmodem
ps [address] - single step through program, skipping procedure
calls
st [address] - single step through program
go [address] - go from start, or continue from breakpoint
fr address#times - display one or more real (32 bit) floating
point numbers
fl address#times - display one or more long real (64 bit)
floating point numbers
fx address#times - display one or more extended real (80 bit)
floating point numbers
da address#times - disassemble one or more instructions
db address#bytes - display one or more bytes
ds address#shrts - display one or more shorts
di address#words - display one or more words
dd address#times - display one or more sets of double words
dt address#times - display one or more sets of triple words
dq address#times - display one or more sets of quad words
re - dump contents of registers
di reg - display the contents of the register 'reg'
mo reg - modify a register. Reg can NOT be fp0-fp3,
mo address#words - modify one or more words in memory
mb address - modify a byte in memory (doesn't read byte first)
fi address address data - fill memory with data value
tr option on/off - turn on or off one of the following trace options
branch, call, return or supervisor call
br [address] - set instruction break. If no address is given,
all current breakpoints are displayed
bd [address] - set data breakpoint. If no address is given,
all current breakpoints are displayed
de address - delete specified instruction or data breakpoint
- repeat previous command
test-clock - test Real Time Clock
test-dram - test DRAM
test-dc - test DRAM chip # in bank
test-ethernet - test Ethernet
test-flash - test Flash
test-fc - test Flash chip
test-serial - test Serial Port
test-sram - test SRAM
test-timer - test Timer
test-all - test all devices, except Flash and SRAM
test-manufact - test all devices