B.1.2.6 flash chip test – Cabletron Systems SFCS-200BX User Manual
Page 124
![background image](/manuals/71890/124/background.png)
B-6
SCP Diagnostics
.
.
Erase Chip
Pattern 1
Erase Chip
Pattern 2
Erase Chip
Pattern 3
Flash: OK
B.1.2.6
FLASH Chip Test
This test checks the functionality of an individual FLASH chip. It takes about
one and a half minutes to run.
NOTE:
It is recommended that you back up your
CDB before running this test. The chip is
saved before it is tested and then restored.
However, if a power failure would occur or if
the switch were rebooted during the test,
some of the data may not be restored
properly.
=>
test-fc 1
Save Chip 1
Erase Chip
Pattern 0
Erase Chip
Pattern 1
Erase Chip
Pattern 2
Erase Chip
Pattern 3
Flash: OK
This manual is related to the following products: