Cabletron Systems SFCS-200BX User Manual
Page 112
A-16
Troubleshooting
NOTE:
The assumed adapter name in the examples
is fa0. On your particular system, the adapter
may have a different designation. To check
the name of your adapter, use the command:
netstat -in.
uname -a
IRIX beluga 5.3 11091812 IP22 mips
ifconfig fa0
fa0: flags=863
inet 198.29.38.206 netmask 0xffffff00 broadcast 198.29.38.255
netstat -nr
Routing tables
Destination Gateway Flags Refcnt Use Interface
127.0.0.1 127.0.0.1 UH 3 2264661 lo0
198.29.24.0 198.29.16.74 UG 1 9751 fa0
default 192.88.243.19 UG 3 123714 ie0
198.29.16.0 198.29.16.54 U 29 10892307 fa0
204.95.89.0 198.29.16.28 UG 0 2080 fa0
198.29.25.0 192.88.243.19 UG 0 0 ie0
198.29.26.0 192.88.243.19 UG 0 2696 ie0
198.29.27.0 192.88.243.19 UG 0 7853 ie0
198.29.19.0 198.29.16.85 UG 0 0 fa0
192.88.243.0 192.88.243.54 U 350 9188789 ie0
204.120.44.0 192.88.243.19 UG 1 1677 ie0
198.29.28.0 198.29.16.8 UG 0 87706 fa0
198.29.29.0 198.29.16.2 UG 0 0 fa0
198.29.31.0 198.29.16.75 UG 5 16417 fa0
198.29.23.0 192.88.243.53 UG 6 122731 ie0