The rear panel – Tascam 122MKIII User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

□ The Rear Panel

28. INPUT XLR-type jacks

: Accept +4 dBm balanced

signals. Pin assignment : Pin 1 is shield (ground). Pin 2 is
Hot (+), and Pin 3 is Cold (-).

29. INPUT UNBAL/BAL switch

: Selects either the

XLR-type or RCA input jacks.

30.

OUTPUT XLR-type Jacks

: Transmit +4 dBm

balanced signals to your mixer, monitor amp, etc. Pin
assignment: Pin 1 is shield (ground). Pin 2 is Hot (+), and
Pin 3 is Cold (-).

31.

OUTPUT RCA jacks :

Transmit -10 dBV

unbalanced signals.

32. INPUT RCA jacks :

Accept -10 dBV unbalanced

signals.

33.

Blank Panel (except 122 MKIII)

: Space for

mounting an optional balanced amp kit (LA-112).

When the LA-112 is installed, you who are using the

112R MKII/112 MKII will have access to the INPUT

XLR-type jacks (#28), the INPUT UNBAL/BAL switch

(#29) and the OUTPUT XLR-type jacks (#30) as with the

122 MKHI.

34. REMOTE CONTROL connector

: This 25-pin D-

sub connector is for controlling the transport from the
optional remote RC-112R (for 112R MKII) or RC-134 (for

122 MKIII and 112 MKII), or for fader start from a mixer.

A 25-pin connector (Part No. 53363571-00) and its jacket

(Part No. 5336358100) are optionally available.

Fader start (122 MKIII and 112 MKII only) : Pins 22 and

24 are assigned for this function. The transport will toggle

Play and Pause, as depicted.