Sears P/N93SR-D02 - Manual (Page 7)

CLEANING AND REPLACING THE AIR FILTER
1. To remove front,
remove one screw from
eadi side of unit. Pull
front off of unit
2. TO rem ove filler,
grasp each side at the
m iddle, push dow n on
filter and pull out until
free,
3. To dean filter, simply
vacuum or wash In
warm,
sudsy water.
Rinse and dry New
filters are available from
yournearest sears store,
4. To replace filter,
grasp each side at the
middle. Insert bottom of
filter first. Pushdown
and flex filter out at the
middle. Push filter in at
lop until it stops. When
installed, filter remains In
bowed position 5. To replace front, hold
front In position on unit
and replace one screw
on each side.
HOW TO LOWER YOUR COOLING COSTS
1. If possible Install the air conditioner on
the shady side of the house.
2. Close drapes and shades on all other
windows to keep direct sunlight out
3. See that draperies or iumllure do not
block the air flow
4. Keep heat inlets dosed so cooled air
won't escape.
5, AventfanlnareaswherecQoklng.laun'
dry or bathing is done can beused to pull
out the extra heat and moisture near Its
sourc»
7. Chedi often to be sure filler Is dean
OFF
MEO
CONSTANT
FAN
MEO
POWER
SAVER FAN
8. if you’it be away for a long lime, tum thè
alr condiuoner FAN CONTROL, to thè 'OFF"
posltion. The alr condltioner wlli not come
on If room temperature gets hot
OFF
6, Check to make sure lights, televisions,
radios, and appliances are turned off when
not needed. Try not to use heat-produdng
lappllancesdurlngthehotteslpartoftheday.
MED
CONSTANT LO
FAN
MED
POWER
SAVER FAN
9, If you'll be away a short «me use the
gold POWER SAVER PAN settings. The
fan will run only when needed.