For your own safety – Sears 113.226424 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
additional safety instructions for belt and
disc Sander
12. Think Safety
Safety is a combination of operator common
sense and alterness at all times when the
Sander is in operation.
^
^ ^
The operation of any power tool can result in for
eign objects being thrown into the eyes, which
can result in severe eye damage. Always wear
safety
goggles
(not
glasses)
complying
with
ANSI Z87.1 (shown on Package) before beginning
power tool operation. Safety Goggles are avail
able at Sears retail or catalog stores.
WARNING: DO NOT ALLOW FAMILIARITY (GAINED FROM FREQUENT USE OF YOUR MACHINE) TO
BECOME COMMONPLACE. ALWAYS REMEMBER THAT A CARELESS FRACTION OF A SECOND IS
SUFFICIENT TO INFLICT SEVERE INJURY,
READ AND FOLLOW THE WARNINGS THAT APPEAR ON THE TOOL:
1. READ AND UNDERSTAND OWNER’S MANUAL
BEFORE OPERATING MACHINE.
2. WEAR SAFETY GOGGLES AND DUST MASK.
3. MAINTAIN 1d6 " MAXIMUM CLEARANCE BETWEEN
TABLE AND SANDING BELT OR DISC.
FOR YOUR OWN SAFETY:
4. AVOID “KICKBACK” (WORKPIECE THROWN AT
YOU)—DO NOT USE RIGHT HALF OF DISC.
5. ALWAYS SUPPORT WORKPIECE WITH “BACK
STOP” OR “WORKTABLE.”
6. DO NOT WEAR GLOVES, NECKTIE OR LOOSE
CLOTHING. TIE BACK LONG HAIR.
E82443