Sears 385. 12714 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
Set Up the Machine
e Plug in the Machine and Switch on the Power
» Foot Control Use
machine, be sure the power switch is
OFF-
1.
Check your outlet to be sure it is a 110 to 120
Volt AC outlet.
2.
Insert the machine plug into the three-prong
plug connector, as shown. It will only fit one
way.
3.
Insert the power supply plug into the outlet.
SAFETY FEATURE:
Your machine will not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power
switch
to
prevent
injury
to
children.
which you sew.
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres
sure slightly.
NOTE; The foot control is sensitive and
will increase or decrease your
sewing
speed
immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.