Sears 385. 12714 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
Stitch Length Control
Adjusting Stretch Stitch Balance (Model 12714 only)
The higher the number, the longer the stich.
"0" means no feed.
Depending upon your fabric or your own preference in buttonholes, you may alter the
buttonhole stitch density within the blue buttonhole range on the stitch length control.
position.
In stretch stitch sewing. Stitch Length Control should
be in the detent position between Sand L (^position)
for most materials. Depending upon the type of fabric
used, you may need to adjust this control to match
forward stitches of stretch sewing with reverse motion
stitches.
To shorten stretch stitches, turn the control slightly
toward "S" To lengthen, turn toward "L"
L »
16