Sears 385. 12714 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
Prepare the Bobbin
o To Remove the Bobbin Case from the Machine
the machine by pulling it to the
left. Open the shuttle cover by
pulling down the embossed part on
the left side of the cover.
Raise needle to its highest position
by rotating hand wheel toward you.
o Wind the Bobbin
tie, pull open latch ot bobbin case.
Pull bobbin case straight out of
moving
bobbin.
while you wind the
shuttle.
This manual is related to the following products: