Sears 580.768050 - Manual (Page 5)

OPERATION
KNOW YOUR HIGH CLEANING SYSTEM
Read this owner’s manual and safety rules before operating your cleaning system. Compare the
illustrations with your cleaning system to familiarize yourself with the locations of various controls and
adjustments.
System Rinse, Detergent and
Chemical Reservoirs with
Internal Filtm* and Baffle
Dual Lance with Quick-
Connect Fitting
Gas Tank
High Pressure Hose
Water Inlet
Primer Bulb
Oil Fill Cap
Dial-A-Cleaner”*
Selector Knob
Pressure
Command™
Pump
Air RIter - Dry type fitter element limits the amount of
dirt and dust that gets in the engine.
Dial-A-Cleaner^ Selector Knob - Selects any one
of three chemicals or the clean water system rinse.
Dual Lance with Quick-Connect Rtting- The dual
lance attaches to the spray gun and allows you to
switch from low pressure mode, for applying
chemicals, to high pressure mode, for cleaning. The
quick connect fitting lets you quickly exchange the four
provided nozzles to adjust the spray pattern of the
high pressure spray.
Gas Tank - Fill gas tank with regular unleaded
gasoline here.
High Pressure Hose - Connect one end to the spray
gun.
Oil nil Cap - Fill engine with oil here. See page 8 for
oil recommendations.
Pressure Command^ - Sets output water pressure.
Primer Bulb - Used to start a cold engine.
Pump - Develops high water pressure.
Spray Gun - Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
System Rinse, Detergent and Chemical Reservoirs
with Internal Filter and Baffle - Used to provide
detergent or other chemicals to the low pressure water
stream.
Water Inlet - Connection for garden hose.