Sears 113.299131 - Manual (Page 27)

PARTS LIST FOR CRAFTSMAN 12-INCH MOTORIZED FLOOR SAW
MODEL NUMBER 113.299131
to
*0
Key
No.
Part
No. Description
1 62459 Motor Assembly (See Fig. 4)
2 30494 Collar
3 60177 -tBIade, Saw, 12" Chisel Tooth
4 6362 Nut, Saw Arbor
5 3540 Wrench, Arbor
6 63062 Wrench, Shaft
7 STD 600803 *Screw, Self-Tapping, No.8-32 x 3/8",
Pan Hd.
8 30613 Clamp, Cord
9 62341 Ring, Retaining, 3/4"
10 62342 Washer, Plain, 25/32 x 1-3/8 x 1/8"
11 62340 Pin, Motor Pivot
12 62339 Support, Motor
13 STD 551131 *Lockwasher, 5/16"
14 STD 523106 *Screw, Mach., 5/16 -18 x 5/8"
15 STD 503705 *Screw, Set, 3/8 -16x5/8",
Hex.Soc. Flat Pt.
16 62093 Screw, Stop
17 62330 Cradle
18 STD 503103 *Screw, Set, 5/16 -18 x 3/8",
Hex.Soc. Cup Pt.
19 62098 Trunnion, Back
20 STD 601103 *Screw, Mach., Type 23, 10-32 x 3/8",
Pan Hd.
21 STD 551012 *Washer, Plain, 7/32 x 1 x 1/16"
22 62100 Bolt
23 STD 571812 Pin, Roll, 3/16 X 1-1/4"
24 62111 Rod, Spreader
25 62218 Bar, Spreader
26 STD 551050 *Washer, Flat, 17/32 x 1-1/16 x 3/32"
27 62094 Screw, Lock
28 38825 Ring, Retaining
29 62097 Rod, Lock Screw Push
30 62331 Knob Assembly, 2-1/4"
31 63011 Washer, Knob Clamp
32 62101 Spacer
33 62099 Trunnion, Front
34 62086 Collar
35 STD 571810 Pin, Roll, 3/16 X 1"
36 62090 Plate, Bearing
37 STD 551125 *Lockwasher, 1/4"
Key
No.
Part
No. Description
38 STD 522506 *Screw, Mach., 1/4 -20 x 5/8",
Hex. Hd.
39 62106 Indicator, Tilt
40 STD 511002 *Screw, Mach., No. 10-24 x 1/4",Pan Hd.
41 62091 Worm, Elevating
42 62332 Knob Assembly, Pull
43 62333 Crank Assembly
44 STD 502503 *Screw, Set, 1/4 -20 x 5/16",
Hex.Soc. Cup Pt.
45 62356 Crank Assembly, Tilt
46 62222 Shaft, Tilt
47 62219 Ring, Retaining
48 62221 iGear
48A 60159 Washer, Spacing, 1-1/2 x .630 x .005
(Used to adjust end-play after installing
Key No. 48, supplied 5 in a package)
49 62223 Worm, Tilt
50 STD 541031 *Nut, Hex., 5/16 -18 x 9/16" x 7/32"
51 62220 IGear
51A 60160 Washer, Spacing, 1-1/2 x .875 x .005
(Used to adjust end-play after installing
Key No. 51, supplied 5 in a package)
52 62400 Base, Saw
53 STD 541025 *Nut, Hex., 1/4 -20x7/16x3/16"
54 62401 Panel, Front
55 STD 610802 *Screw, Sheet Metal, No.8 x 5/16",
Type "B", Pan Hd.
56 62113 Stiffener, Leg
57 803835 Foot, Leveling
58 118647 *Nut, Hex., 1/2-13 X 3/4 X 5/16"
59 STD 522505 *Screw,Mach., 1/4 -20 x 1/2",Hex.Hd.
60 62460 Leg, Base
61 62095 Nut, Height Lock
62 STD 522503 *Screw, Mach., 1/4 -20 x 3/8",Hex.Hd.
63 62096 Wrench, Lock
64 37911 *Wrench, Hex-"L", 3/16"
65 37837 *Wrench, Hex-"L", 5/32"
66 30505 *Wrench, Hex-"L", 1/8"
67 37836 *Wrench, Hex-"L", 3/32"
68 60194 *Wrench, Hex-"L", 1/16"
*Standard Hardware Item - May Be Purchased Locally.
+Stock Item - May be secured through the hardware departments of most
Sears orSimpsons-Sears Retail Stores or Catalog Order Houses.
$When replacing gear (Key 48), use spacing washers (Key 48A) to adjust end-play.
$When replacing gear (Key 51), use spacing washers (Key 51A) to adjust end-play.