Startup, Hook up your tv, Plug in the tv – Sears 274.4394859 User Manual
Page 4: Put batteries in the remote, Turn on the tv, Quick guide to your tv
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Startup
The steps below will get your TV connected and ready for watching.
For more details, see the page numbers listed.
Quick Guide to Your TV
1. Hook up your TV
Details are in the Connections
Guide.
Hook up any anleiuias, cables or
other equipment to your TV before
you follow the steps below.
CAUTION: If you choose to use' a
stand
with your TV, take precautions that the stand or other furniture the
TV is placed on is properly located and of adequate si/e and strength to pre\'ont the TV from accidentally
being tipped over or pulled off. This could cause damage to the TV and or personal injury.
2. Plug in the TV
Plug the cord into the outlet,
matching the wide and the small
end of the plug with the outlet.
3. Put Batteries in the Remote
A. Pull off fhe cover of fhe battery
compartment.
B. Place the four AAA bafferies as
shown, matching the + and —
end of each batfery in the
compartment.
C. Replace the cover.
4. Turn on the TV
MENU CHV CH/\ VOL- VOL+
o o o o o o
Press TV on the remote.
OR
Press POWER on the TV.