Sears 274.4394859 - Manual (Page 12)

With VCRs: Basic Operation
If the remote operates your VCR, this page will show you how to use it tor
basic functions. See pages 6-7 for more details on buttons used with your VCR.
Using Your TV and Remote
Turn on the VCR
Turn off the VCR
• C. i'ress enaniiei UU, UJ, >.)] U4 Oii
the TV to see what the VCR is
doing.
B. Press VCR1 or VCR2-LD to set
the remote to control the VCR.
C. Press POWER to turn on the
VCR if it did not turn on when
you pressed VCR1 or
VCR2«LD.
A. Press VCR1 or VCR2»LD to set
the remote to control the VCR.
B. Press POWER.
Record one TV program
and watch another
Watch a tape in your VCR
A. Press VCR1 or VCR2*LD to set
the remote to control the VCR.
B. Tune the VCR to the channel
you want to record using
CHANNEL up or down or
pressing two number buttons.
C. Press RECORD to start
recording.
D. Press TVA/CR on the VCR.
E. Press TV to set the remote to
control the TV.
F. Press CHANNEL up or down to
change channels on the TV.
G. To see the channel you are
recording, tune the TV back to
channel 00, 03, or 04.
A. Turn on VCR.
B. Insert a tape in the VCR.
C. Press PLAY to start the tape
playing.
D. Press STOP when you are
finished.
E. Press REW to rewind the tape.
10